In general, most Apple users wonder to update their iPhones to the latest iOS version. In the upgrading process, error 4014 is a common issue. If a picture with "The iPhone could not be restored. An unknown error occurred (4014)" pops up, that your iPhone fails to be updated. In this article, top 10 solutions to fix iPhone error 4014 will be listed.
Part 1. The causes of iPhone error 4014
There are some reasons as follows:
(1) Your iTunes cannot recognize your device (faulty USB cable/port)
(2) Your Wi-Fi network is unavailable
(3) The iTunes is not the latest version
(4) The storage of the iPhone is not enough
Part 2. 10 best solutions to repair iPhone error 4014
#1 Inspect your USB cable/port whether connecting your PC successfully
Sometimes the updating problems are related to the hardware. If the cable cannot work well, then the connection between the computer and the device doesn't exist. Pay attention to the port. Maybe the cable is just loose.
#2 Try another USB cable/port
If you ensure the hardware has been connected correctly and you still have faulty updating, you should consider changing another USB cable.
#3 Use another computer
The upgrading process involves the USB cable, your iPhone, and your computer. Therefore, if you have changed another USB cable but there are still problems, you can try another computer.
#4 Check out the Wi-Fi network
Poor Wi-Fi network can affect the process to upgrade and even directly interrupt it. We should take this condition into account. If you cannot make sure whether the Wi-Fi network goes wrong, you can choose Reset Network Settings.
#5 Clean up your device to release more capacity
As is known to us all, the storage is too full to cause the devices to react slowly. The new version is more advanced, and we should guarantee enough capacity.
#6 Download and install the latest iTunes version
Your device is going to update the latest iOS system, so you should first promise the latest iTunes. Or the previous version might have some issues related to compatibility.
#7 Restart both your iPhone and the computer
I believe that many people will choose to reboot their devices no matter what issues occur. As a result, restarting can solve most of the abnormal scenarios.
#8 Put the iOS device into Recovery Mode
In most cases, Recovery Mode can repair errors. Before taking this method, you should ensure your iTunes is the latest version.
Step1: Put your iPhone in Recovery Mode. Close iTunes > Connect the iOS device to the computer > Open iTunes > Force restart it into the mode. Taking iPhone 5s as an example, press the Home and the top key together until entering the Recovery Mode.
Step2: Connect to iTunes in Recovery Mode and begin recovery.
Notice: When you see the choice to update or restore, click Update (not Restore) to install iOS again and remain your individual data.
#9 Try the third-party tool: Joyoshare UltFix
Joyoshare UltFix is a professional repair tool for iOS system. It can fix over 30 iOS & tvOS issues, including various stuck problems, iPhone could not be restored error (including error 9, 4005, 4013, or 4014) etc. The software offers 2 repair modes (Standard Mode & Advanced Mode). The former can repair most iOS system issues without data loss. The latter can put the iDevice to factory setting and remove the screen lock without iTunes. Joyoshare UltFix has Enter/Exit Recover Mode. You just need to click twice to finish Recover Mode, so you can avoid the complicated operations such as what has been discussed in Solution#8. Most importantly, it's totally free.
Key Features:
- Be compatible with the latest iOS 13
- Support many iOS devices (iPhone/iPad/iPod touch/Apple TV)
- Free Enter /Exit Recovery Mode
- High safety
- Lossless recovery
Introduce 4 simple steps to fix error 4014 via Joyoshare UltFix:
If Recovery Mode still cannot repair your issues, you can attempt to use Standard Mode. One of the most important features is that it doesn't cause data loss. You just need to take 4 steps to finish the recovery.
Step 1: Run Joyoshare UltFix and connect iOS device, you should make sure that the connection is complete. Or click Enter Recovery Mode, then directly click Start.
Step 2: Choose the repair mode. You have two options, Standard Mode can fix most system issues, including iPhone error 4014. If you need to remove your screen code or factory reset, Advanced Mode is nice.
Step 3: Download and verify firmware package. In this step, you could also choose to downgrade your iOS version.
Step 4: Click the Repair button. And the recovery process is done. Next, you can try to update your latest system on iPhone.
#10 Contact Apple
If you have tried every method as recommended and failed to restore your device, the last way you should use is to contact Apple. Because it sounds like not system issues, but the iPhone itself and you should send it for repairing.
Conclusion:
Maybe some try the first solution and solve their problems. But others take several measures and iPhone error 4014 still occurred. Therefore, if you don't exactly know what solution you should take, just attempt each. If you don't want to spend so much time to try one by one, directly use the third-party tool: Joyoshare UltFix. It is very easy to use. Just need several clicks. And error 4014 will be repaired.
No comments:
Post a Comment